| Customization: | Available |
|---|---|
| After-sales Service: | Offer |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Descripition
This product is specially designed for laser pipe cutting units. The product itself can be used as an independent rotating spindle, with a chuck in the middle that can clamp a workpiece tightly and rotate at the same time. Rotating air intake is achieved by the rear-mounted rotator so as to achieve fast clamping and loosening actions. The gas source is the principle of continuous air supply when the chuck works.
The clamping force of the product is large, the clamping force is stable, the adjustment is convenient, the efficiency is high, the rigidity is higher than the long clamping claw, the precision can be maintained for a long time, and there is no phenomenon that the bending deformation of the clamping claw affects the rotary precision; the design length of the clamping claw is short, and the maximum clamping force does not cause the phenomenon that the long clamping claw horn, which causes slippery, does not occur, and the clamping is unstable; the chuck is simple in structure, light in weight, small in rotational inertia and low in energy consumption.
2. Performance Parameters
| Model number | W300T-50 |
| Claw stroke | 108mm |
| Maximum clamping force | 3.6KN |
| Alloable pressure | 0.3-1MPa |
| Limit speed | 400r/min |
| Clamping range | Φ10-Φ320 |
| Central height | 182.5mm |
| Rotational inertia | 1.05kg.m2 |
| Rotating part weight | 100kg |
| Whole unit weight | 168kg |
Note: above numbers are standard parameters. We can also design products according to clients' special requirements.
3. Dimensions
Specifications |
A | B | B1 | C | D | E | F | H | M | N | P | Q | S | T | G |
W300T-50 |
320 | 182.5 | 304 | 386 | 150 | 70 | 290 | 50 | 45 | 2 | 30 | M8 | 18 | 521.5 | 802 |
4. Advantages
e.1 Solid or hollow
e.2 Comb-type or mortise-groove type claws
5. Product Line
6. Package
7. Our Service
){kind=link}